|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
K2000P便捷式电动绞盘
K2000Pb便捷式电动绞盘
K5000P便捷式电动绞盘 |
|
Electrical Requirements |
12 Volt DC Input |
Load Capacities |
11000Lbs.(Rolling) |
|
9900Lbs.(Marine) |
|
3500Lbs.(Pulling) |
Power In and Out Capability |
Yes |
Wire Rope |
5.5mm x9.2m |
Battery Cable Lengths |
25Ft. |
Remote Cable Length |
10Ft. |
Main Hook Size |
5/8" Opening x4-1/4" Long |
NW/GW |
17KG/18.5KG |
Electric winch with permanent magnetic motor
Model |
Capcity |
Power |
Steel cable |
Size (L X W X H) |
NW |
LD3500-B |
3500LB |
DC12V |
F5.5mm X 11.2m |
240 X 240X 210mm |
17KG |
Pull, Speed, Amperes, Volts (First Layer)
Line Pull (lbs./ kg) |
Line Speed FPM(m/min) |
Motor (Amps) |
0 |
19.6ft (6.0m) |
5 |
500 (227) |
16.3ft (5.0m) |
10 |
1,000 (454) |
14.7ft (4.5m) |
20 |
2000 (907) |
13.0ft (4.0m) |
23 |
3000 (1361) |
12.0ft (3.7m) |
26 |
3500 (1591) |
11.1ft (3.4m) |
30 |
Line Pull And Rope Capacity In Layer
Layer |
Rated Line Pull (lbs./kgs) |
Tatal Rope On Drum (ft/m ) |
1 |
3500 (1587) |
4.9 (1.5) |
2 |
3095 (1400) |
11.4 (3.5) |
3 |
2445 (1100) |
19.6 (6.0) |
4 |
2140 (970) |
29.4 (9.0) |
5 |
1910 (865) |
36.6 (11.2) |
由12V直流电供电的功率在1KW左右的永磁电机驱动,减速器采用了三级外齿啮合,其电机、减速器以及滚筒均集成在一个可便携的塑料壳体内。标定拉力3500lbs(1587kgf)。基本配置包括主机、紧急手摇杆、电源线、控制手柄及快装底座。
- 便携,有一个可折叠的提手柄和快装板。
- 电动进退双向功能(Power in and Power out)。
- 配备附件:带有断路器和插头的电源线;带有防水插头的长距离线控手柄;30英尺带有挂钩的航空钢丝绳;与拖车相配的快装底座;应急用转臂手柄和可调离合器。
- 绞盘产品严禁用来提升或载人;
- 不要在满载下连续工作超过一分钟,以免电机烧坏;
- 在电机工作过热时,请让电机冷却后再继续进行作业;
- 建议在负荷超过60%标定拉力时使用动滑轮;
- 有限的产品保质期。
|
|
|
|
|
|
|
|
|